How to Install Vinyl Decals to a Wall

 

Step 1

Clean the surface thoroughly with rubbing alcohol or cleaning solution. 

step 2

Use a long piece of masking tape along one edge creating a “hinge” to tape the graphic into place. 

STEP 3

Fold the graphic back against the hinge and remove the backing.

STEP 4

Fold back over and hold your graphic barely off the surface.  Use a credit card or very flat straight edge to apply.  Apply from taped side outward moving in a V shape from center out (see image on left).  Use overlapping strokes to ensure graphic sticks to surface. 

STEP 5

Remove application tape by pulling back at a 180 degree angle.  If the graphic starts to lift up, lay it back down and press firmly.

STEP 6

There may be a few air bubbles, if so, poke them once with a sharp needle.